N2高压微射流均质机

During the early stages of research and development, sample costs are high and batch sizes are small. In response to this need, our company has overcome numerous technical limitations and pioneered the industry by introducing the convenient desktop-model N2. This equipment features low minimum batch requirements, minimal sample residue, and low acquisition costs, while still achieving an operating pressure of up to 30,000 psi. Its utility requirements are relatively simple—it only needs to be plugged in and does not require an air compression source. Compared to traditional air compression-driven homogenizers, this equipment offers the advantages of continuous operation, low noise, and minimal pollution. It meets the initial development needs of high-value-added samples such as pharmaceuticals and novel materials, effectively reducing material and equipment acquisition costs for each experiment.

It is worth mentioning that this model, along with the larger-capacity models produced by our company, employs an impingement diamond reaction chamber based on the same design principle, allowing experimental data to be easily scaled up. The N2 high-pressure homogenizer is specifically designed for small-batch samples and initial research requirements, effectively assisting you in quickly establishing a research foundation and achieving results that meet international standards.

Specifications

Pressure Range: Up to 30,000 psi (2,068 bar)

Flow Rate: Up to 50 ml/min

Minimum Sample Volume: 20 ml, with heat exchanger

Max. Feed Temperature: 75 °C

Power Unit: Electric-hydraulic

Nozzle Material: Diamond, fixed geometry

Plunger Material: Ceramic

Enclosure: Stainless steel

Hold-up Volume: 2 ml

Dimensions (W x D x H): 620 x 900 x 550 mm

Weight: 120 kg

Utility Requirements:

‧ Electrical: Single phase 220 V, 60 Hz, 2HP (1.5 kW)

‧ Cooling Water, hydraulic oil: 5 lpm @25 °C, PT 1/2"

‧ Cooling Water, product outlet: 10 lpm @16 °C, PT 1/2"

Optional Accessories

Low-temperature water bath

Spare homogenization chamber

Dedicated mobile cart with wheels

Temperature control for homogenization chamber

Product outlet temperature controller

Spare feed cup

Pressurized feed cup

Backflush

Validation documents

Factory acceptance and final acceptance

Extended warranty service

在早期研发过程中，样品成本高昂且批量较小。针对这一需求，本公司突破了诸多技术限制，率先在行业内推出便捷的桌面型 N2。该设备具有最小批量要求低、样品残留量少、购置成本低的特点，同时操作压力仍可高达30,000 psi。其公用设施需求较为简单，只需插电即可运行，无需使用空气压缩源。与传统的空气压缩驱动型均质破碎机相比，该设备具有可连续操作、噪音低、污染少的优点，能够满足药物及新型材料等高附加值样品的初期开发需求，有效降低每次试验的物料及设备购置成本。

值得一提的是，此机型与本公司生产的大产能机型均采用相同设计原理的对撞式钻石反应腔，实验数据可轻松实现规模化放大。N2高压均质机专为小批量样品及初期研究需求而设计，能有效协助您快速建立研究基础，研究成果可达国际水准。

规格

压力范围：最高30,000 psi (2,068 bar)

流量：最高50 毫升/分钟

最小样品量：20 毫升（带热交换器）

最高进料温度：75 ℃

动力单元：电动-液压式

喷嘴材质：金刚石，固定几何结构

柱塞材质：陶瓷

外壳：不锈钢

残留体积：2 毫升

尺寸（宽x深x高）：620 x 900 x 550 毫米

重量：120 公斤

公用设施要求：

‧ 电源：单相220伏，60赫兹，2马力（1.5千瓦）

‧ 液压油冷却水：5升/分钟 @25℃，PT 1/2"接口

‧ 出料口冷却水：10升/分钟 @16℃，PT 1/2"接口

可选配件

低温水槽

备用均质腔

带轮专用移动台车

均质腔温度控制

出料温度控制器

备用进料杯

加压式进料杯

反向清洗功能

验证文件

工厂验收与最终验收

延长保修服务