Microfluidizer Homogenizer System

1.Working flow工作流量：3L/H- 5000L/H

2.Working Pressure工作压力：High Pressure(高压）30000psi,2100bar,210MPa

                                  Very High Pressure(极高压）60000psi,4200bar,420MPa

3.Pumping System泵系统：Industrial high pressure pump and intensifier工业高压泵系统和增压器系统

4.Homogenising Valve均质阀：“Reverse flow piston gap” style homogenising valve,Ceramic material;and Micro-channel device system,Diamond material间隙式阀组 陶瓷材质；微通道射流装置 金刚石材质

5.Cooling冷却系统：Power pack heat exchanger included 动力系统热交换夹套

                             Post homogenisation heat exchanger – included 均质后换热器

                             To supply system with double wall jackets for the intensifier barrels to allow them to be heated or cooled by fluid circulation. （Option)

                             Heat exchangers require connection to cooling fluid supply, same supply can be used or independent supplies.

6.Control控制系统：The system is PLC controlled with HMI interface. System provides data logging of pressure and temperatures.系统采用PLC控制，人机界面。系统提供压力和温度的数据记录。

               To supply upgrade control interface and software for 21 CFR Part 11 compliance.（Option)提供符合21 CFR Part 11的升级控制接口和软件。(可选)

7.Pipe & Fittings管件及配件：All high pressure pipe and fitting are manufactured from corrosion resistant steel. Inlet and outlet connections 3/4” & ½” Triclamp, or as otherwise agreed. 

                                            所有高压管件均采用耐腐蚀钢制造。进料口和出料口连接3/4“& 1 / 2”Triclamp，或另行约定。

8.Enclosures & System Connections机箱和系统连接：

The case/enclosures construction matches the high pressure parts' construction and auxiliary system construction, optional remote control, and more Asian ergonomic modeling structure.机箱构造匹配于高压端构造和辅助系统构造，可选远程控制，以及更符合亚洲人人体工学的造型结构。

The complete system is mounted into a fabricated stainless steel frame with levelling feet. Lockable castors are optionally available. 整个系统安装在一个带有调平脚的不锈钢框架中。可锁脚轮可选。

Pneumatic supply to the unit will be through G1/4 female bulkhead connection. 气动供应将通过G1/4母闷头连接。

Electrical supply to be connected directly to the terminal strip through cable entry gland. Ø ½” BSPP(F) connections will be provided for cooling fluid inlet and outlet connections. 电源通过电缆入口压盖直接连接到端子条上。将提供ؽ”BSPP(F)连接，用于冷却液进口和出口连接。

9.Documentation文件：Instructions and maintenance manuals使用说明书和维护手册

                                     To supply DQ/IQ/OQ documentation, IQ/OQ to be completed locally（Option)提供DQ/IQ/OQ文件，IQ/OQ在客户处完成(可选）

高压均质机系统
高压纳米均质分散（微射流）系统

不同于传统的分散设备、破碎机或乳化设备的操作方式，它可生产0.01微米粒径的微颗粒。由于恒压和即时的生产处理方法(颗粒分布均匀，完全均匀，提高生产率)，生产过程中没有内在物理性质的变化。由于材料的持续投入于生产，它提供了改进的处理速度。

采用自行研发的金刚石微孔模块，具有独特的性能和耐久性。更换物料时，易控制流量和清洗液体接触部位。重复试验和压力调整操作简单。方便流量的缩放，使工艺连续稳定。